Small failures become big ones fast here
An equipment pad in the East Valley works in conditions most pool gear was never really designed for: 110-degree summers, monsoon dust, and some of the hardest water in the country. Motors overheat, o-rings dry out and crack, scale builds inside salt cells and heater elements, and sun-baked PVC gets brittle enough to snap on a hand-tight fitting.
The pattern we see over and over: a small symptom — a new noise, a slow leak at the pump lid, air bubbles in the returns — gets ignored for a few weeks, the part fails completely, circulation stops, and a $150 fix turns into a dead pump and a green pool in the same week. When something on your pad sounds or looks different, that’s the cheap moment to call.
What we work on
- Pumps. Failed capacitors, burned windings, shaft seals, cracked lids and baskets, priming problems, full replacements. If you’re replacing, we’ll walk you through variable-speed options — the electricity savings are real, and utility rebates are often available for the upgrade.
- Filters. Cracked tanks, failed pressure gauges, broken laterals in sand filters, torn cartridges and grids, leaking multiport valves. (If your filter just needs a proper cleaning rather than a repair, that’s a separate service — we’ll tell you which one you need.)
- Timers and automation. Mechanical timers that stopped turning, tripped or failing relays, and basic automation setups so the pump runs when power is cheap.
- Valves and plumbing. Diverter valves that won’t seat, suction-side air leaks, pressure-side drips, and the o-rings and unions that hold it all together.
- Salt systems. Cells that read low salt when salt is fine, scale-fouled cells, and boards that stopped talking to the cell. If your system is beyond saving, we’ll quote a replacement or a new conversion.
How we quote repairs
We diagnose first and put a number on it before work starts. If a repair doesn’t make sense — the classic case is a major failure on a pump that’s already past its life expectancy — we’ll say so and show you the replacement math instead. You’ll never get a repair bill that snuck up on you.
What drives repair cost: the part itself, whether the failure damaged anything downstream, and access to your pad. Labor is straightforward; parts vary with the brand and age of your equipment.
The cheapest repair is the one you catch early
Every weekly service visit includes an equipment check for exactly this reason. Our techs listen to the pump, watch the pressure, and look for the drips and rust streaks that signal what’s coming. Catching a $20 o-ring before it becomes a flooded equipment pad is the whole point.
If something on your pad is making a noise it didn’t make last month, call (480) 799-6361 — describing the sound over the phone is often enough for us to tell you how urgent it is.